标准号：ISO 23278-2006
实施状态：作废
中文名称：焊接无损测试.焊接的磁性颗粒测试.验收水平
英文名称：Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
发布日期：2006-10
被替代标准：ISO 23278-2015
代替标准：ISO/FDIS 23278-2006
采用标准：DIN EN ISO 23278-2010,IDT;DIN EN ISO 23278-2009,IDT;BS EN ISO 23278-2010,IDT;EN 1291-1998,IDT;EN 1291/A1-2002,IDT;EN 1291/A2-2003,IDT;EN ISO 23278-2009,IDT;FprEN ISO 23278-2009,IDT;NF A89-551-2010,IDT;A89-551PR,IDT;SN EN ISO 23278-2010,IDT;OENORM EN ISO 23278-2009,IDT;OENORM EN ISO 23278-2009,IDT;PN-EN ISO 23278-2010,IDT;UNE-EN ISO 23278-2010,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies acceptance levels for indications from imperfections in ferromagnetic
steel welds detected by magnetic particle testing.
The acceptance levels are primarily intended for use during manufacture examination, but where appropriate
they can be used for in-service inspection.
The acceptance levels in this International Standard are based on detection capabilities that can be expected
when using techniques specified in ISO 17638 and parameters recommended in Annex A. The acceptance
levels can be related to welding standards, application standards, specifications or codes. Such a relationship
is shown in ISO 17635 for ISO 5817.
文件格式：PDF
文件大小：154.60KB
文件页数：8
（以上信息更新时间为：2019-11-22）
ISO 23278-2006 焊接无损测试.焊接的磁性颗粒测试.验收水平.pdf
(154.6 KB)
|
|
