标准号：ISO 14520-1-2006
实施状态：作废
中文名称：气体灭火系统.物理特性和系统设计.第1部分:一般要求
英文名称：Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements
发布日期：2006-02
被替代标准：ISO 14520-1-2015
代替标准：ISO 14520-1-2000;ISO/FDIS 14520-1-2005;ISO 14520-1 Technical Corrigendum 1-2002
采用标准：DIN EN 15004-1-2008,MOD;DIN EN 15004-1-2007,MOD;BS ISO 14520-1-2006,IDT;BS EN 15004-1-2008,MOD;EN 15004-1-2008,MOD;prEN 15004-1-2007,MOD;PN-EN 15004-1-2008,MOD;UNE-EN 15004-1-2009,MOD
起草单位：ISO/TC 21
标准简介：This part of ISO 14520 specifies requirements and gives recommendations for the design, installation, testing,
maintenance and safety of gaseous fire fighting systems in buildings, plant or other structures, and the
characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing
medium.
It covers total flooding systems primarily related to buildings, plant and other specific applications, utilizing
electrically non-conducting gaseous fire extinguishants that do not leave a residue after discharge and for which
there are sufficient data currently available to enable validation of performance and safety characteristics by an
appropriate independent authority. This part of ISO 14520 is not applicable to explosion suppression.
This part of ISO 14520 is not intended to indicate approval of the extinguishants listed therein by the
appropriate authorities, as other extinguishants may be equally acceptable. CO2 is not included as it is covered
by other International Standards.
This part of ISO 14520 is applicable to the extinguishants listed in Table 1. It is essential that it be used in
conjunction with the separate parts of ISO 14520 for specific extinguishants.
文件格式：PDF
文件大小：137.08KB
文件页数：2
（以上信息更新时间为：2019-11-22）
ISO 14520-1-2006 气体灭火系统.物理特性和系统设计.第1部分_一般要求.pdf
(137.08 KB)
|
|
