标准号：ISO 4308-1-2003
实施状态：作废
中文名称：起重机和提升设备.钢丝绳的选用.第1部分:总则
英文名称：Cranes and lifting appliances - Selection of wire ropes - Part 1: General
发布日期：2003-05
被替代标准：ISO 16625-2013
代替标准：ISO 4308-1-1986;ISO/FDIS 4308-1-2003
采用标准：BS ISO 4308-1-2003,IDT;GB/T 24811.1-2009,IDT;JIS B 8835-1-2006,MOD;UNE-ISO 4308-1-2007,IDT
起草单位：ISO/TC 96
标准简介：This part of ISO 4308 specifies two methods for the selection of wire rope to be used on lifting appliances as designated in ISO 4306-1, one based on the value of the rope selection factor C and the other based on the value of the coefficient of utilization Zp
This part of ISO 4308 establishes the minimum requirements for acceptable strength and performance levels of wire ropes with respect to the design, application and maintenance of the lifting appliance.
This part of ISO 4308-1 establishes the minimum requirements for the diameters of drums and sheaves that are to be associated with the selected wire rope.
A non-exhaustive list of types of lifting appliance to which this part of ISO 4308 is applicable is given in Annex A.
Annex B provides some examples of rope selection.
Annex C gives factors, additional to those mentioned above, which may need consideration when selecting the wire rope.
Annex D specifies the selection method for the diameter of the compensating sheave when used in relation to hoists.
文件格式：PDF
文件大小：368.77KB
文件页数：28
（以上信息更新时间为：2019-11-23）
ISO 4308-1-2003 起重机和提升设备.钢丝绳的选用.第1部分_总则.pdf
(368.77 KB)
|
|
