标准号：ISO 2560-2002
实施状态：作废
中文名称：焊料.非合金钢和细粒钢的手工金属电弧焊接的涂敷焊条.分类
英文名称：Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
发布日期：2002-11
被替代标准：ISO 2560-2009
代替标准：ISO 2560-1973;ISO/FDIS 2560-2002;ISO 2560 ADD 1-1974
采用标准：DIN EN 499-1995,MOD;DIN EN ISO 2560-2006,IDT;DIN EN ISO 2560-2005,IDT;BS EN ISO 2560-2006,IDT;EN ISO 2560-2005,IDT;prEN ISO 2560-2005,IDT;NF A81-309-2006,IDT;A81-309PR,IDT;JIS Z 3211-2008,MOD;SN EN ISO 2560-2006,IDT;OENORM EN ISO 2560-2006,IDT;OENORM EN ISO 2560-2005,IDT;UNE-EN ISO 2560-2006,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 N/mm<up2> or a minimum tensile strength of up to 570 N/mm<up2>.
This International Standard is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.
1) Paragraphs and tables which carry the suffix letter "A" are applicable only to covered electrodes classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in this International Standard.
2) Paragraphs and tables which carry the suffix letter "B" are applicable only to covered electrodes classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in this International Standard.
3) Paragraphs and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all covered electrodes classified in this International Standard.
文件格式：PDF
文件大小：1.33MB
文件页数：36
（以上信息更新时间为：2019-11-23）
ISO 2560-2002 焊料.非合金钢和细粒钢的手工金属电弧焊接的涂敷焊条.分类.pdf
(1.33 MB)
|
|
