标准号：ISO/ASTM 51261-2002
实施状态：作废
中文名称：辐射处理用剂量测定系统的选择和校准指南
英文名称：Guide for selection and calibration of dosimetry systems for radiation processing
发布日期：2002-03
被替代标准：ISO/ASTM 51261-2013
代替标准：ISO 15556-1998;ISO/ASTM FDIS 51261-2001
采用标准：ASTM/ISO 51261-2002,IDT;GB/T 16640-2008,IDT
起草单位：ISO/TC 85
标准简介：1 This guide covers the basis for selecting and calibrating dosimetry systems used to measure absorbed dose in gamma-ray or X-ray fields and in electron beams used for radiation processing. It discusses the types of dosimetry systems that may be employed during calibration or on a routine basis as part of quality assurance in commercial radiation processing of products. This guide also discusses interpretation of absorbed dose and briefly outlines measurements of the uncertainties associated with the dosimetry. The details of the calibration of the analytical instrumentation are addressed in individual dosimetry system standard practices.
2 The absorbed-dose range covered is up to 1 MGy (100 Mrad). Source energies covered are from 0.1 to 50 MeV photons and electrons.
3 This guide should be used along with standard practices and guides for specific dosimetry systems and applications covered in other standards.
4 Dosimetry for radiation processing with neutrons or heavy charged particles is not covered in this guide.
5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.
文件格式：PDF
文件大小：1.05MB
文件页数：24
（以上信息更新时间为：2019-11-23）
ISO_ASTM 51261-2002 辐射处理用剂量测定系统的选择和校准指南.pdf
(1.05 MB)
|
|
